Embed our tools on your website
Run a gaming or hardware blog? Let your readers test their own gear without leaving your page. Every RigPolice tool drops into your site with one snippet of code. The widget loads live, runs in the reader's browser, and sends nothing back to us.
Why put a test on your page
These aren't decorative widgets. Each one answers a real question your reader has about their own gear: how fast they click, whether a switch double-fires (the double-click test flags two presses under 50 ms), if a panel is hiding a stuck pixel. Drop one into a mouse review or a buying guide and the reader runs it without leaving. They read on. Free, no ads inside the frame, no account required.
// tools you can embed
Mouse DPI Analyzer
Measure your mouse's real DPI in the browser. Move it a set distance against a ruler to read the true number, then compare it to the DPI set in your software.
CPS Test
Test your click speed in the browser. Click as fast as you can over a timed window and see your clicks per second, total clicks, and best score.
Mouse Test
Test your mouse buttons, scroll wheel, and detect double-click failures in your browser. Free, no installation, and instant results every time.
Double-Click Test
Test any mouse button for double-click chatter in your browser. Click as you normally do while we time each gap and flag a switch that double-fires.
Mouse Polling Rate Test
Measure your mouse polling rate in the browser and see how many times per second it reports to your PC in Hz. Free, no install, instant results.
Refresh Rate Test
Measure your monitor's real refresh rate in the browser. See live Hz, frame timing, and stability to confirm a 60, 120, 144, or 240Hz panel runs at full speed.
Dead Pixel Test
Find dead, stuck, and hot pixels. Cycle full-screen solid colors in your browser, no install, and check every pixel on a monitor, laptop, or phone.
Sensitivity converter
Sensitivity converter by RigPolice
Reaction Time Test
Test your reaction time online. Click the moment the screen turns green and your speed in milliseconds shows up. Run many rounds and trust the average.
Typing Speed Test
Test your typing speed online. Type a passage and watch your live WPM and accuracy, with mistakes flagged in red. A fast words-per-minute check, no install.
Keyboard Tester
Test every key on your keyboard online. Press each key to see it light up live and catch dead keys, stuck keys, ghosting, and rollover limits, no install.
Mouse Drag Test
Hold and drag to catch your mouse button releasing mid-stroke. Switch to Angle Snapping mode and draw the guide to see if the sensor flattens your diagonal.
Monitor Test
Test your monitor in the browser with full-screen color, gradient and grid patterns. Spot backlight bleed, IPS glow, banding and dead pixels in minutes.
Online Tone Generator
Free online tone generator. Play a pure sine, square, triangle, or sawtooth from 20 Hz to 20 kHz, plus white and pink noise. Test your hearing range and gear.
Speaker & Headphone Test
Test your speakers and headphones online. Play a tone in the left, right, or both channels to catch a dead side, swapped channels, or an off-center balance.
Controller Drift Test
Check your controller for stick drift in the browser. Watch the sticks and triggers live, run a three-second drift check, and get an OK or DRIFT verdict, free.
Touchscreen Test
Test your touchscreen in the browser. See how many fingers it registers at once, find dead spots and ghost touches, and check multitouch on a phone or tablet.
Internet Speed Test
Free browser internet speed test: measure download, upload, ping, jitter and bufferbloat against Cloudflare, then see how your line rates for gaming and calls.
Two ways to embed
iframe
Paste a plain tag. Fixed height, no scripts required. Use this if your CMS strips script tags.
<script>
Drop in our one-line loader. It sets the width and height for you, so nothing gets cut off. Better choice for responsive layouts.
Embedding FAQ
- Is it free to embed these tools?
- Yes. Every tool is free to embed, with no fee and no account. Grab the snippet and paste it.
- Do I have to link back to RigPolice?
- The copied snippet adds a small credit link under the tool. We ask you to keep it, but you're free to style it. It's nofollow by default. Flip it to dofollow in the embed panel.
- Will it slow my site down?
- No. The tool loads inside its own frame, and only when the reader scrolls near it. Your page paints first. The loader script is tiny and cached, so a second embed on the same page costs almost nothing.
- Can I match it to my site's colors?
- The widget renders in its own dark theme inside the frame, so it's readable on any background. You control where it sits and how wide the frame runs with your own CSS. The script embed fills its column automatically.
- Can I preset a sensitivity pair?
- Yes. The sensitivity converter takes a starting game pair. Open its embed panel, pick the two games, and the snippet carries that preset so the widget opens on the conversion you want.
- Which tools can I embed?
- Right now you can embed the DPI analyzer, CPS test, mouse test, double-click test, polling rate test, refresh rate test, dead pixel test, and the sensitivity converter. Open any one and use the Embed button to copy its code.
- How do I install it?
- Open a tool, click Embed, and copy the snippet. Paste it into your page where you want the tool to appear. It works in plain HTML and in WordPress, Wix, Ghost, or any builder that accepts an embed or custom-HTML block.
Want a tool we don't list yet?
Building a review or guide that needs a test we haven't made? Tell us what your readers need to check. If it fits in the browser, we will look at building it and adding it to the embeddable set.
Request a tool